SERVICE

Dongfeng Tianjin 14cbm garbage compression truck review

10-20-2020

Dongfeng Tianjin 14cbm garbage compression truck review

 

Dongfeng Tianjin 14cbm garbage compression truck uses the original Dongfeng company chassis, the front axle is 5 tons, the rear axle is 10 tons, Dongfeng six-speed gearbox, 132kw Cummins 180 horsepower national five engine, 9.00R20 steel tire, 4700mm wheelbase, electric Doors and windows, central control lock, original ABS, air conditioner, with direction assist, separation and quality, air brake, ABS anti-lock brake system, other Dongfeng company standard equipment.

 

Dongfeng Tianjin 14cbm garbage compression truck consists of a hydraulic mechanism composed of a car body, a charging mechanism, a compression mechanism, a discharge mechanism, an oil pump, an oil cylinder, and a control valve. The material of the car body is high-quality carbon steel, thickness (unit: mm): 5 sides and 5 bottom, and the volume of the car body: 14m3. The charging mechanism is composed of a bracket, a linkage mechanism, a cam, a hook, etc. Under the action of the oil tank, the garbage in the trash can is automatically turned over and poured into the hopper. It is equipped with a Siemens PLC one-piece control system, operation automation, and double control mechanisms for the cab and the rear.

Optional:

  1. Hanging barrel turning mechanism.
  2. Dustpan turning mechanism.

The compression mechanism is composed of a steel plate welded with a channel steel, a guide wheel and an oil cylinder seat, etc., which are pushed by the oil cylinder to compress the garbage in the hopper into the compartment. Compression cycle time: 25-30s, compression density: 0.6-0.8t/m3. The discharging mechanism is composed of a discharging oil cylinder and a discharging push plate. The discharging push plate is welded by steel plates and brackets. It is positioned by a guide groove, and the oil cylinder is extended to push the discharging push plate to discharge garbage. Time for discharging garbage: 40s .

Dongfeng Tianjin 14cbm Garbage Compression Garbage Truck Turnover Mechanism: Optional turnover mechanism with garbage can (or bucket).

 

Features of Dongfeng Tianjin 14cbm compression garbage truck:

1: The garbage collection method is simple: change the messy and old appearance of garbage cans all over the streets in the city, and prevent secondary pollution.

2: High compression ratio and large loading capacity: The maximum crushing pressure is up to 12 tons, and the loading capacity is equivalent to twice and a half of the same ton of non-compressed garbage.

3: Operation automation: using a computer control system, one driver is required to operate all loading and unloading operations, and two operating modes, fully automatic and semi-automatic can be set.

It not only reduces the labor intensity of sanitation workers, but also greatly improves the working environment.

4: Good economy: When the special equipment is working, the computer control system automatically controls the throttle.

5: Double insurance system: The operating system has dual functions of computer control and manual operation, which greatly protects and improves the utilization rate of the vehicle.

Introduction and performance characteristics of Dongfeng Tianjin 14cbm compression garbage truck:

  1. Function introduction: Compressed garbage truck is composed of sealed garbage compartment, hydraulic system and operating system. The whole vehicle is a fully sealed type, and all the sewage in the process of self-compression, self-dumping, and compression enters the sewage tank, which more thoroughly solves the problem of secondary pollution during garbage transportation and avoids inconvenience to people. The key components are adopted Imported parts have the advantages of high pressure, good sealing, convenient operation and safety. Optional rear hanging bucket turning mechanism or garbage bucket turning mechanism.
  2. Product overview: The dedicated part of the compressed garbage truck is composed of garbage compartment, sewage tank, filler, scraper, dozer multi-way reversing valve, hydraulic system, bucket hanging device, etc. The compression garbage truck is a fully sealed type. The sewage in the compression process directly enters the sewage tank, which completely solves the secondary pollution during the garbage transportation. The key components are imported components.
  3. Product overview: The main parts of the compressed garbage truck are solenoid valves imported from Italy, new cabinet design, and Siemens electronic control switches.