1. Strong skill, long range, strong penetrating power, strong adhesion of fog particles, wide coverage, and can achieve precise spray.
2. High working efficiency and fast spraying speed; when spraying water to remove dust in the yard that is easy to cause dust, the sprayed mist particles are small and form a humid mist when contacting with the floating dust, which can quickly suppress the dust Settlement, the fogging settling rate can reach 95%.
3. The secondary atomization technology adopts a specific turbine wind assist device to change the wind direction to form an angle with the flow direction of the mist particles to promote full water atomization.
4. When the droplets are sprayed from the nozzle, they are further broken by the high-speed high-pressure air flow in the spray area, and the velocity of the droplets is gradually increased, which improves the degree of atomization. The atomization can generally reach about 50-150um in diameter. . The supporting power is flexible, which can be used for both three-phase 380V mains power supply and diesel generator set.
5. The supporting diesel generator set is installed on the transportation vehicle with flexible operation, safe and reliable use, remote control and manual control operation, and can freely control and adjust the horizontal rotation spray angle.
6. Water consumption can save 70% ～ 80% compared with other dust suppression spray equipment (spray gun, sprinkler), and the area of dust covered by water mist is much larger than other dust suppression spray equipment.
1. Equipped with high-quality water pump, nozzle, motor, stable performance, safe and reliable, can be used in harsh environments for a long time, resistant to water corrosion and rust.
2. The spray speed is fast, the range is high (far), the penetration and adhesion are good; when the coverage area is large, the mist particles are small, and it comes into contact with the floating dust, a humid mist is formed, which can quickly suppress the dust fall.
||Max Speed (km/h)
||Tank Volume (m3)
|Total Weight (kg)
||Rated Weight (kg)
|Curb Weight (kg)
||Front-seat Passenger (person)
|Axle Load (kg)
|1. The vehicle only uses a wheelbase of 3308mm, the effective volume of the tank is 4.17 cubic meters, and the tank size is (mm): 6500/3100×1700×1150/2137/2800.
2. Protective material: Q235B carbon steel, connection method: Welding connection is used for left and right side and rear lower protection. The rear protective section size (mm): 120 × 50, the rear protective ground clearance (mm): 430.
3. ABS model / manufacturer: ABS / ASR-12V-4S / 4M / Xiangyang Dongfeng Longcheng Machinery Co., Ltd.
4. Special device: tank body, mainly used for road watering and garden greening.
5. Optional cab with chassis.